This bike was built by Lucas Oil for the Motorcycle Riders Foundation as a bike giveaway.  A Frame Lock™ was fitted to the custom frame.


 

The bike below was built by Klock Werks, it has been fitted with a Frame Lock™.


 

Height Adjustable Frame Lock™:
Shown below are designed for height adjustability. Each model has adjustment of 1-1/4".  These Frame Locks™ will accommodate bikes with frame heights varying from 2-3/4" to 6-1/2".  For those who have the existing Frame Lock™, this will bolt into the existing location.

Video 1: Shows how the adjustability works on these  Frame Locks™.

Low
(Part # : FL7)

Medium
(Part # : FL8)

High
(Part # : FL9)


 

Video 2: Shows the easy use of this system.

The Pictures below show a bike  mounted on this system.

Height Adjustable Track Frame Lock™:
 The models utilize a track system to  increase  adjustability  and ease of  removal.  The track is bolted to the floor using flat head cap screws, fender washers and nylon nuts.  Once installed, bikes can be placed anywhere up and down the track to accommodate different lengths and quantities of motorcycles.
Low
(Part # : FL10)		 Medium
(Part # : FL11)		 High
(Part # : FL12)

 

Solid Mounted Frame Tabs:
DRM Industries and Klock Werks are in the process of building a custom motorcycle.  The frame was built by Rolling Thunder, permanent tabs have been welded on the frame.  These tabs eliminate the need for frame clamps.  The Pin Bracket is then mounted to these tabs and pinned to the Frame Lock™.  The frame has been Electrocoated by DRM Electrocoat.  The bike will be on display at the V-Twin Expo in Cincinnati (Feb. 2nd - 4th, 2008).

Print 1: This shows how the tabs are installed.


 

To Order Call (608) 254-8158
7am - 4pm Central, Mon - Fri

231 W. Adams St.
Lake Delton, WI 53940